Field Notes · Water and Permits

Permits, wetlands, and shoreland

A lot of the best land in the Lakes Region sits near water, and New Hampshire regulates vegetation work near water closely. Here's what the rules cover, how we handle them on the walk, and what stays your responsibility.

A New Hampshire lake shoreline with forest down to the water
Representative Lakes Region shoreline. The first 250 feet from the water is regulated

The questions we ask on every property

Before we price anything, we ask four things: is there a stream, a wetland, a steep slope, or a shoreline on or next to the work area? Each one can change what's allowed, what needs a permit, and how the machine works. We'd rather find it on the walk than after the work starts.

Shoreland: the 250 foot zone

New Hampshire's Shoreland Water Quality Protection Act (RSA 483-B) covers all land within 250 feet of the reference line of public waters: the larger lakes and ponds, coastal waters, and designated rivers. Inside that zone, two bands matter most for vegetation work.

  • The waterfront buffer, the first 50 feet. Stumps and their roots stay in the ground unless the state approves otherwise. Natural ground cover stays, apart from the uses the law lists. Trees and saplings are scored in 25 by 50 foot segments, and each segment has to keep a minimum score.
  • The woodland buffer, out to 150 feet. At least a quarter of the band between 50 and 150 feet has to stay natural woodland.

Those rules can limit or rule out mulching close to the water. Where they apply, we flag the boundary, work outside it or within what's allowed, and tell you before we quote whether anything needs a permit or a notification to the state.

Wetlands, streams, and banks

Under RSA 482-A, removing, filling, dredging, or building in or on a bank, marsh, or swamp next to any water of the state needs a permit from the NH Department of Environmental Services. Whether a particular job falls under that rule is the department's call, not ours. If a wetland or stream touches the work area, we scope around it, and anything that needs a permit waits until you have one.

Steep slopes

Slope decides where the machine can work safely and where soil could move toward water. Steep ground is scoped on foot during the walk, and anything outside the machine's safe working range stays out of the plan.

Who does what

We doAsk about water and slope, identify regulated zones on the walk, flag and trace the boundary, and say in writing what may need a permit before we quote
You doApply for any permit or notification the work needs, and pay its fees. We don't file permits on your behalf
The state decidesWhether a permit is required. Shoreland and wetland determinations belong to NHDES and your town
The workNothing that needs a permit starts until the permit is in hand
Not legal advice. This note summarizes state law in plain language so you know what to ask. Your town may add its own rules. For a determination on your property, ask NHDES or your town. We'll never tell you work near water needs no permit.

Water and fire

Near the water, the buffer rules come first. Any fuel treatment around a lakefront house works inside them, and we'll show you where that leaves room to work.

Where this comes from

  • NH RSA 483-B:4 and 483-B:9, the Shoreland Water Quality Protection Act (definitions and minimum shoreland protection standards).
  • NH RSA 482-A:3, excavating and dredging permits.

Near The Water?

Tell us what's on the property

Mention the lake, the stream, or the wet spot on the form. We'll walk it, flag what the rules touch, and tell you plainly what can and can't be done.

Start Your Project Forestry mulching only · Stems to 6 in.
Start Your Project